U-Trough Power Sweep System

Grain Saver® Power Sweeps are engineered to perform!

Our heavy-duty, fully welded design will maximize productivity, lifespan, and minimize maintenance.

Gate Features

All models 30′ and up have 3 gates, 40′ and up have 4 gates. Any size 60′ and up with additional gates as needed. The gates are controlled by rack and pinion mechanisms.

Steel rollers under the hopper gate ensure easy sliding when under pressure.

Models 42′ and up have a secondary center hopper, serving as a backup, and saves hours of unnecessary work if the center hopper becomes blocked. All hoppers are guarded by 1/2″ safety rods welded to the hopper.

The gearbox lever is locked in position by a blocked tab which can be secured with a padlock.

Sweep Auger

The sweep auger is coupled to the lower gearbox by a swivel, which can be quickly detached by removing a single bolt. To save on equipment costs, sweep augers can be used on multiple, similar sized bins.

Spill shields prevent grain from spilling over backboards, leaving less manual labor for the opertor.

All models 42′ and up have a 1/2″ rod truss with welded braces every 2 feet.

Sweep lengths are adjustable +/- 12″ to optimally fit bin diameter, eliminating hours of manual labor.

The Sweep flighting is secured every 8-10″ with a long life wooden hanger bearing.

Backboard

Backboard extensions are secured by 4 bolted connections. Length adjustment takes just minutes.

The Backboard tilts +/- 10″, adding more working hours to the sweep drive wheel as it wears.

The Backboard is supported by a roller, allowing the extension to roll smoothly along the bin floor.

Sweep Drive Options… All U-trough Power Sweep Systems come standard with a 9″ 1:1 ratio drive wheel. Some sweep auger applications require gear reduction mechanisms. For these situations we offer an adjustable reduction wheel with a replaceable rubber disc. The sweep tractor is optional and recommended for large and commercial power sweep models.

We recommend all sweep models 54′ and up to be fitted with a tractor. The tractor unit is powered by a 100:1 ratio gear reducer and an explosion-proof electric motor (motor not included). Foam-filled rubber tires maintain firm floor contact as the unit assists the back board rotation.

Shown here, our 4.6:1 reduction wheel drive, designed to make bin sweeping a breeze. Superior long-life design with a fully enclosed gear housing and replaceable rubber wheel. Also available in this style is a 10:1 reduction wheel drive.

Bin Diameter	Hoppers	8″ Part #	10″ Part #
19′	2	802-19-1102U	102-19-1102U
21′	2	802-21-1102U	102-21-1102U
24′	2	802-24-1102U	102-24-1102U
27′	2	802-27-1102U	102-27-1102U
30′	3	802-30-1103U	102-30-1103U
33′	3	802-33-1103U	102-33-1103U
36′	3	802-36-1103U	102-36-1103U
42′	4	802-42-1104U	102-42-1104U
48′	4	802-48-1104U	102-48-1104U
54′	4	802-54-1104U	102-54-1105U
60′	5	–	102-60-1105U